• 0471-2471601

    24x7 phone assistance

  • Fast Delivery

    All product safe

Member Login

Welcome back, friend. Login to get started

Member Register


Add a Review

Image Alternative text Image Alternative text Image Alternative text

24C04-Serial EEPROM

70

The AT24C01A/02/04/08A/16A provides 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.

  • Two-wire Serial Interface
  • Bidirectional Data Transfer Protocol
  • Write Protect Pin for Hardware Data Protection
  • Schmitt Trigger, Filtered Inputs for Noise Suppression

The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. 

Pin Description : SERIAL CLOCK (SCL): The SCL input is used to positive edge clock data into each EEPROM device and negative edge clock data out of each device. SERIAL DATA (SDA): The SDA pin is bidirectional for serial data transfer. This pin is open-drain driven and may be wire-ORed with any number of other open-drain or opencollector devices. DEVICE/PAGE ADDRESSES (A2, A1, A0): The A2, A1 and A0 pins are device address inputs that are hard wired for the AT24C01A and the AT24C02. As many as eight 1K/2K devices may be addressed on a single bus system (device addressing is discussed in detail under the Device Addressing section). The AT24C04 uses the A2 and A1 inputs for hard wire addressing and a total of four 4K devices may be addressed on a single bus system. The A0 pin is a no connect and can be connected to ground. The AT24C08A only uses the A2 input for hardwire addressing and a total of two 8K devices may be addressed on a single bus system. The A0 and A1 pins are no connects and can be connected to ground. The AT24C16A does not use the device address pins, which limits the number of devices on a single bus to one. The A0, A1 and A2 pins are no connects and can be connected to ground. WRITE PROTECT (WP): The AT24C01A/02/04/08A/16A has a Write Protect pin that provides hardware data protection. The Write Protect pin allows normal Read/Write operations when connected to ground (GND).

The AT24C01A/02/04/08A/16A provides 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.

Related Products

Image Alternative text
MICRO LITHIUM COIN 3V CELL CR2032 MOTHERBOARD BATTERY
  • 9
  • 10
Image Alternative text
TOWER PRO SG90 MINI 9 GRAM GEAR MICRO DIGITAL SERVO MOTOR
  • 126
  • 140
Image Alternative text
7 x 4 CM Robot Wheels
  • 40
  • 45
Image Alternative text
ERL TWO CHANNEL 12V RELAY BOARD MODULE
  • 76
  • 84
Image Alternative text
K3011P OPTOISOLATOR 5.3KV TRIAC 6DIP
  • 15
  • 17
Image Alternative text
CP2102(Red) USB 2.0 to TTL UART Serial Converter
  • 150
  • 167