• 0471-2471601

    24x7 phone assistance

  • Fast Delivery

    All product safe

Member Login

Welcome back, friend. Login to get started

Member Register


Add a Review

Image Alternative text Image Alternative text Image Alternative text

DHT22 Temperature and Humidity Sensor

279

The DHT22 is a basic digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin, no analog input pins needed.

  • Accuracy:±2%
  • Voltage - Supply:3.3 V ~ 6 V
  • Humidity Range:0 ~ 100% RH
  • Sensor Type:Humidity, Temperature

The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the right most pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin! We have written an Arduino library with example code

Compared to the DHT11, this sensor is more precise, more accurate and works in a bigger range of temperature/humidity, but its larger and more expensive

Comes with a 4.7K - 10K resistor, which you will want to use as a pullup from the data pin to VCC.

The DHT22 is a basic digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin, no analog input pins needed.

Related Products

Image Alternative text
IC 4047
  • 16
  • 18
Image Alternative text
ATTINY13A
  • 45
  • 45
Image Alternative text
ACS712 CURRENT SENSOR 20AMP
  • 200
  • 222
Image Alternative text
SL100 Transistor
  • 14
  • 14
Image Alternative text
40 pcs of Male to Male jumper cable wires of 30 cm long(set of 40)
  • 82
  • 82
Image Alternative text
9v Battery connector with dc jack
  • 3
  • 3