• 0471-2471601

    24x7 phone assistance

  • Fast Delivery

    All product safe

Member Login

Welcome back, friend. Login to get started

Member Register


Add a Review

Image Alternative text Image Alternative text Image Alternative text

AVR Microcontroller ATMEGA8-16PU DIP-28

80

The low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB of programmable flash memory, 1KB of SRAM, 512B EEPROM, and a 6 or 8 channel 10-bit A/D converter. The device supports throughput of 16 MIPS at 16 MHz and operates between 2.7-5.5 volts.

  • Advanced RISC Architecture.
  • 32 x 8 General Purpose Working Registers
  • High Endurance Non-volatile Memory segments
  • Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode

Tmega8 microcontroller has 23 programmable input/output (I/O) pins which can be used for interfacing with external world. It is possible to configure them as input or output by setting a particular register value through programming. This IC comes in 3 different packages, but we are using the popular 28-Pin PDIP package (Atmega8-16PU). Note that Atmega8 is available in 2 versions; ATmega8 and Atmega8L. Atmega8L is a low frequency version which works up to 8MHz frequency.

The 23 I/O ports of ATmega8 are organised into 3 groups:

  • Port B (PB0 to PB7)
  • Port C (PC0 to PC6)
  • Port D (PD0 to PD7)

Features

• High-performance, Low-power AVR® 8-bit Microcontroller

• Advanced RISC Architecture

– 130 Powerful Instructions – Most Single-clock Cycle Execution

– 32 x 8 General Purpose Working Registers

– Fully Static Operation

– Up to 16 MIPS Throughput at 16 MHz

– On-chip 2-cycle Multiplier

• High Endurance Non-volatile Memory segments

– 8K Bytes of In-System Self-programmable Flash program memory

– 512 Bytes EEPROM

– 1K Byte Internal SRAM

– Write/Erase Cycles: 10,000 Flash/100,000 EEPROM

– Data retention: 20 years at 85°C/100 years at 25°C(1)

– Optional Boot Code Section with Independent Lock Bits

In-System Programming by On-chip Boot Program

True Read-While-Write Operation

– Programming Lock for Software Security

• Peripheral Features

– Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode

– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture

Mode

– Real Time Counter with Separate Oscillator

– Three PWM Channels

– 8-channel ADC in TQFP and QFN/MLF package

Eight Channels 10-bit Accuracy

– 6-channel ADC in PDIP package

Six Channels 10-bit Accuracy

– Byte-oriented Two-wire Serial Interface

– Programmable Serial USART

– Master/Slave SPI Serial Interface

– Programmable Watchdog Timer with Separate On-chip Oscillator

– On-chip Analog Comparator

• Special Microcontroller Features

– Power-on Reset and Programmable Brown-out Detection

– Internal Calibrated RC Oscillator

– External and Internal Interrupt Sources

– Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and Standby

• I/O and Packages

– 23 Programmable I/O Lines

– 28-lead PDIP, 32-lead TQFP, and 32-pad QFN/MLF

• Operating Voltages

– 2.7 – 5.5V (ATmega8L)

– 4.5 – 5.5V (ATmega8)

• Speed Grades

– 0 – 8 MHz (ATmega8L)

– 0 – 16 MHz (ATmega8)

• Power Consumption at 4 Mhz, 3V, 25°C

– Active: 3.6 mA

– Idle Mode: 1.0 mA

– Power-down Mode: 0.5 µA

The low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB of programmable flash memory, 1KB of SRAM, 512B EEPROM, and a 6 or 8 channel 10-bit A/D converter. The device supports throughput of 16 MIPS at 16 MHz and operates between 2.7-5.5 volts.

Related Products

Image Alternative text
HC-SR501 PYROELECTRIC INFRARED PIR MOTION SENSOR DETECTOR MODULE
  • 90
  • 100
Image Alternative text
ESP8266 Serial WIFI Module Adapter Plate for ESP-07 ESP-08 ESP-12 Wi Fi
  • 57
  • 63
Image Alternative text
MPU6050 GY-521 Module 3 Axis analog gyro sensors+ Accelerometer,3 Axis Gyroscop
  • 166
  • 184
Image Alternative text
DC 12V 1A Constant Current Power Adapter for 220V AC
  • 130
  • 145
Image Alternative text
2N3906 - PNP Transistor
  • 4
  • 4
Image Alternative text
2N3055 Transistor
  • 43
  • 48