• 0471-2471601

    24x7 phone assistance

  • Fast Delivery

    All product safe

Member Login

Welcome back, friend. Login to get started

Member Register


Add a Review

Image Alternative text Image Alternative text Image Alternative text

DIY KIT - ACRYLIC ROBOT CHASSIS BODY with PLATFORM

699

Use 40mm Sleeve as spacers on M3x50mm Screws for mounting Platform. Use 2 of 15mm Sleeves on each of M3x50mm Screws for Castor Wheel. Use M3x25mm Screws for fixing BO Motor Clamps as well as BO Motors onto it. Use Pointed Screws for fixing BO Motor wheels. 2 Holes for connecting wires from BO Motors.

  • 1 x Acrylic Robotic Base and 1 x Acrylic Platform
  • 2 x BO Motor Wheel and 2 x BO Motor Clamp
  • 4 x Sleeve (40mm) and 6 x Sleeve (15mm)
  • 1 x Castor Wheel

Users can drill extra holes using drillers or use two sided tapes for fixing the boards as per required.

Use 40mm Sleeve as spacers on M3x50mm Screws for mounting Platform. Use 2 of 15mm Sleeves on each of M3x50mm Screws for Castor Wheel. Use M3x25mm Screws for fixing BO Motor Clamps as well as BO Motors onto it. Use Pointed Screws for fixing BO Motor wheels. 2 Holes for connecting wires from BO Motors.

Related Products

Image Alternative text
Raspberry Pi 2 Model B
  • 2699
  • 2699
Image Alternative text
INTEL GALILEO2.P INTEL GALILEO GEN 2 DEVELOPMENT BOARD
  • 5999
  • 5999
Image Alternative text
4.3 inch Serial Interface Electronic Paper Display
  • 5220
  • 5800
Image Alternative text
Breadboard 840 Tie Points
  • 65
  • 65
Image Alternative text
ERL Buzzer Module
  • 40
  • 40
Image Alternative text
WIRE STRIPPER
  • 54
  • 54