• 0471-2471601

    24x7 phone assistance

  • Fast Delivery

    All product safe

Member Login

Welcome back, friend. Login to get started

Member Register


Add a Review

Image Alternative text Image Alternative text Image Alternative text

5V Micro USB 1A 18650 Lithium Battery Charging Board Charger Module

75

• 100% Brand new and high quality • it is very convenient for you to use • Charge module- Linear charging. • It has MICRO USB female • It still retain the input voltage wiring solder joints, can be very convenient to DIY • Ampere meter can only be connected to 5v input end of the module. • It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough. • The connection wire should not be too thick. • Make

  • • Input voltage- 4.5V-5.5V.
  • • Full charge voltage- 4.2V.
  • • Input interface- micro USB.
  • • Work temperature- -10¡æ to +85¡æ

  • 100% Brand new and high quality
  • it is very convenient for you to use
  • Charge module- Linear charging.
  • It has MICRO USB female
  • It still retain the input voltage wiring solder joints, can be very convenient to DIY
  • Ampere meter can only be connected to 5v input end of the module.
  • It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
  • The connection wire should not be too thick.
  • Make sure the connect point is good.
  • If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
  • NO Reveral polarity.
  • Current- 1A adjustable.
  • Charge precision- 1.5%.
  • Input voltage- 4.5V-5.5V.
  • Full charge voltage- 4.2V.
  • Led indicator- red is charging Green is full charged.
  • Input interface- micro USB.
  • Work temperature- -10¡æ to +85¡æ
  • Inversed polarity- NO.
  • Size: 27X17mm.

• 100% Brand new and high quality • it is very convenient for you to use • Charge module- Linear charging. • It has MICRO USB female • It still retain the input voltage wiring solder joints, can be very convenient to DIY • Ampere meter can only be connected to 5v input end of the module. • It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough. • The connection wire should not be too thick. • Make

Related Products

Image Alternative text
Raspberry-Pi 7" Touch Screen Display with 10 Finger Capacitive Touch RASPBERRY-PI RASPBERRYPI-DISPLA
  • 6500
  • 6500
Image Alternative text
Cermet Preset 20K Ω (ohm) (Variable Resistance)
  • 5
  • 6
Image Alternative text
2N2222A-NPN High Speed Switching Transistor
  • 3
  • 3
Image Alternative text
7400 - Quad 2 Input NAND Gate
  • 13
  • 14
Image Alternative text
SIMCOM SIM900A GSM MODULE IC
  • 629
  • 629
Image Alternative text
Pot - 100K
  • 4
  • 5